Renewable Energy Incentive Program Forms
Submit an Application Packet
Applicants must submit a completed Application Packet with all required documents and signatures. In addition to the REIP application form, the Application Packet must contain all of the information identified in the appropriate REIP Application Checklist. The new Solar Technical Worksheet (dated June 2010) with revised rebate amounts must be included in the Application Packet. Older versions are not accepted.
Solar Application Packet (NOTICE: Solar rebate applications will be accepted for Funding Cycle 3 starting September 1, 2010)
- REIP Application Checklist *Updated July 2010*
- Ten-Year Certification Letter
- Rebate Application
- Solar Technical Worksheet (**New**Effective for all applications submitted for Funding Cycle 3 (September 1, 2010).
- Application Conversion REIP to SRP *New for Funding Cycle 3 Applications
Wind Application Packet
- REIP Application Checklist (wind) *Updated June 2010*
- TenYear Certification Letter
- Rebate Application
- Wind Pre-Application *Updated June 2010*
- Wind Technical Worksheet and Instruction *Updated June 2010*
Biopower Application Packet
- REIP Application Checklist (biopower) *Updated June 2010*
- Ten-Year Certification Letter
- Rebate Application
- Biomass Equipment Technical Worksheet *Updated June 2010*
Incomplete or illegible applications will be returned to the applicant without exception and funds will not be reserved. Applicants must correct deficiencies and resubmit the full Application Packet to be considered for eligibility.
Tools needed to complete the Technical Worksheets:
PVWatts and Alternative calculator use is identified in the Application Checklist and the Solar and/or Wind Technical Worksheet.
Request a State Inspection
Applicants must submit a completed As Built Packet with all required documents and signatures as identified in the As Built Checklist in order to schedule a State inspection. As instructed in the As Built Solar Technical Worksheet, the actual solar azimuth or orientation must be within +/- 3 degrees of the azimuth or orientation reported in the As Built Solar Technical Worksheet and used in the estimated production calculation for the system.
* All applicants must submit the As Built Checklist, As Built Solar Technical Worksheet, and ANSI C12 Certified Meter Worksheet (if applicable) listed below regardless of project approval year.
As Built Packet components include:
- As Built Checklist
- As Built Solar Technical Worksheet
- ANSI C12 Certified Meter Worksheet
- REIP Solar Technical Worksheet (Dated Jan 2010 - Needed if system size has changed)
- REIP Solar Technical Worksheet (Dated April 2010 - Needed if system size has changed)
Tools needed to complete the As Built Technical Worksheets:
PVWatts
For shading analysis
To verify the Solar Azimuth orientation
Submit Final Paperwork Packet
Applicants must submit a completed Final Paperwork Packet including all required documents and signatures in order to receive and NJ Certification Number, receive a rebate check, and generate SRECs.
If your solar project was approved in 2009, you must use the 2009 Final Papework Checklist. If your solar project application was submitted to the Market Manager Team on or after January 1, 2010, you must use the 2010 Final Paperwork Checklist.
- 2010 Final Paperwork Checklist
- 2009 Final Paperwork Checklist
- Utility Interconnection Agreement
- NJ Tax certification certificate
- Energy Efficiency measure completion documentation
Program Contacts
Correspondence and inquiries should be directed to:
Renewable Energy Incentive Program
New Jersey's Clean Energy Program
c/o Conservation Services Group
75 Lincoln Highway
Iselin, New Jersey 08830
Phone: 866-NJSMART (866-657-6278)